I-Mit-ivy yeshishini lesinyithi eliPhambili le-Acrylic Latex yokuTywina iPrimer enegunya lokungena elinamandla
Ukusetyenziswa
Inokubambelela okugqwesileyo kwiziseko zentsimbi kunye nezinto zokuqala ezisekwe emanzini, kunye neempawu ezibonakalayo zomzimba kunye nezomatshini emva kokuba ipeyinti yomile.
5. Ifilimu yepeyinti inokulondolozwa kokukhanya okukhanyayo kunye nokugcinwa kombala emva kokumiswa.
Isicelo esinconyelwayo Kufanelekile ukukhuselwa kwemijelo yamanzi, iilori, izixhobo zoomatshini, ukukhanya kwezixhobo zeshishini, njl. Apho kufuneka ukhuseleko oluphezulu.
Idatha yobuchwephesha Umbala uhambelana
Umphezulu owomileyo (50% ukungachaneki) 15 ℃ C <1h ； 25'C <0.5h
Ukomelela okuqinileyo (50% ukufuma) 15'C <48h; 25 ° C <24h
Ukubetha "kg.cm" 50
Amanzi (50 ± 5μm) ifilimu yepeyinti engama-72h ayisebenzi, ayincedi ukuwa, hayi umhlwa.
Ukuqina kwe-0.3 (pendulum kabini) yovavanyo lwepropathi yovavanyo lwefilimu (23 ± 3jμm)
Adhesion (Hegelian) Inqanaba 1
Unyango oluphezulu umphezulu wezinto ezifatyiweyo kufuneka ungabikho kufuma, ioyile, i-asidi yekhabhoni kunye nothuthu.
Iinkcukacha ezikhawulezayo
I-Steel enesikhumba se-oxide: Ukutshiza okanye iindlela zokutshiza isanti ezifana nokucwangciswa kwinqanaba le-Sa2.5, apho ukuqhuma kwentlabathi kungenakwenziwa kufuneka kuphuculwe okanye
Ukunyangwa ngokwamachiza ukususa onke amagxa aqhekekileyo.
Isinyithi ngaphandle kwesikhumba se-oxide: isandi esenziwe ngesanti (edutyulwe ngebhulethi) ukuya kwi-Sa2.5 okanye izixhobo ezisebenza ngombane, izixhobo zokugaya zombane kwi-St3.
I-Welding, ukusika ilangatye okanye ukulungiswa komlilo kwiindawo ezitshileyo: ukugaya kwinqanaba le-St3.
Izinto ezisisiseko ngefilimu endala yepeyinti: susa ii-particle ezindala kunye ne-rust, kunye nesanti kwi-St3 kunye nomoya okanye izixhobo zombane zesanti.
Iphakheji yokupeyinta eqhelekileyo inokusetyenziswa kunye ne-H902 eyisiseko esekwe emanzini, okanye isetyenziswe yodwa njengebhasikiti yokuhombisa ngokubanzi, okanye isetyenziswe nezinye iintlobo zeemveliso zokuqala (kufuneka zihambelane nokuqinisekiswa).
Construction data Table dry (50% temperature) 15'C<th;25℃C<05h Actual dry (50% humidity) 15℃C<24h;25℃<12h Density about 1.1-1.20g/cm' Theoretical coating rate 0.15-0.2kg/m' (dry film 40-50) μm)
It is recommended to apply 2 coatings, which can be applied in the way of warm touching temperature to ensure that the dry film is 40-50μm.
To be sanded and finished with sandpaper.
Construction method Air or robot spraying is possible. Mix the paint before use, adjust the viscosity according to the construction method.
Add 5-15% of water. Add water and stir evenly, then leave the surface to work without bubbles.
Construction environment 1. The brain playground should have good ventilation and dust removal facilities to ensure the quality of construction.
2. The construction should be carried out under the condition that the mixing degree is above 5℃C and the relative humidity of the environment should be <70%.
3. The substrate temperature shall be not less than 5' and shall be more than 3'C above the air dew point temperature.
washout
| Vehicle Type | 100% Acrylic Latex | |
| COMPOSITION (nominal) | Pigment : Lightfast Non-Lead Pigments & Mineral Extenders.
Blinder : Acrylic Emulsion. Solvent : Water. |
|
| Volume Solids | 31.8% | |
| Coverage per Gallon at Recommended Film Thickness | 400 –450 Sq. Ft. (37-42 m2) | |
| Recommended Film Thickness
(Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint) |
Dry 1.2 mils
Wet 3.8 mils |
|
| Dry Time @ 77° F (25° C) @ 50% RH
(High humidity and cool temperatures will result in longer dry, recoat and service times.) |
To Touch 1 Hour
To Recoat 2 to 4 Hours |
|
| Dries By | Evaporation, Coalescence | |
| Viscosity | 99 ± 2 KU | |
| Gloss / Sheen | Flat (5-10 @ 85°) |
| Shipping time by Sea (Just for reference) | ||||||||
|
North America |
11~30 days | North Africa | 20~40 days | Europe | 22~45 days | South-east Asia | 7~10 days | |
| South America | 25~35 days | WestAfrica | 30~60 days | MiddleEast | 15~30 days | East Asia | 2~3 days | |
| Middle America | 20~35 days | EestAfrica | 23~30 days | Ocenia | 15~20 days | South Asia | 10~25 days | |
FAQ
1.About Sample
We provide free sample for testing.
2.OEM,ODM service available.
3.According to customer's request, packed with pallet or without pallet.
Tile adhesive(20kg/bag)packing with pallet specification:
64 bags/pallet = 1.28 MT/pallet
72 bags/pallet = 1.44 MT/pallet
One full 20ft container max loading 27.6MT.
With pallets can load 1360 bags, without pallet can load 1380 bags.
